Product Description

Vespa P/A Gear Selector Rod - P Series

Manufacturer: CIF Italy

The gear selector rod connects the gear selector box on the outside

of the motor, with the gear cog selector cruciform inside the motor.

This enables the cruciform to be placed exactly in position within the

desired gear cog on the output shaft every time you change gear and

make sure that the power of the motor can be effectively transmitted

through the desired gear, to the output shaft, and finally the rear wheel.

Always make sure you order the gear selector rod specific to your type

of engine.

Otherwise the gears will not remain selected and will jump out during use.

Helpful Hint: Do not forget to secure the cruciform properly on the selector

rod during assembly and to remember the left handed thread of this particular item.

TECH-TIP: Always check that you assemble the gear cogs correctly arranged and in the right order . Do not forget to measure the end float to be sure of the correct tolerances for your output shaft assembly. Check the cruciform and selector box for wear and always use fresh gear box oil!